TUFESP

I have just purchased a 3 care radiator, ef thermos and the davies craig thermo fan switch i would like too know how to mount the thermo fans on the radiator without damaging it.

CLP

Its just a case of making brackets to hold them solid to the radiator. try to cover as much of the radiator as you can... I used 2 fans to do this.

or if ya feeling clever... buy a set of ef or el fans and try and make them fit.

I have pics of mine but dont know how to post a pic....

anyone..?

__________________
XE 6cyl: TO4E Turbo,

brenx

To mount the EF thermo's you need to drill a 2-3mm hole through the plastic on the thermo's. Then run a screw though to the original mounting holes for the shroud. Thats the top section.

Then there should be a line of thin metal running down the engine side of the radiator. Drill two holes small enough for a small zip ties to go through. Run the zip tie through one hole, then under the thin metal strip and back out the other hole. Thats the bottom mounted securely.

Brenden

__________________
XB Fairmont (street car) 11.07@123.02mph.