I8AHSV

I was wondering if there is anyone that owns Ford SVO (Ford Motorsport) 24lb injectors & if so could you please verify these numbers for me.

Bosch Injector (Blue In Colour) 280 150 775.

I just need to know if this is the correct number & if it's not could you please write down the correct numbers for the Bosch Blue Injectors

svo347

From look'n at mine the # is F1TE-280150947....
hope that helps..
cheers

__________________
FORD.... "POWER TO THE PEOPLE"...

Member of the "TKTDSGM " Group..

Jase_ELXR8

http://www.geocities.com/ttskipp/injector.html

Check the above link. It says the number you gave aren't 24's. The number svo302 gave is definatly 24, but it's not on the web page.

I8AHSV

Thanx to everyone that responded because I had this wanker trying to sell them to me as bosch blue except I though that bosch blue injectors where light blue in colour & not dark blue.....Now when I see the guy next time I am going to tell him where to go!!!

LTDHO

OK, mine has F1ZE on the body, but they are orange in colour.

F1ZE are 14Lbs

Orange are 19 Lbs.

Now I'm confused...

__________________

Jase_ELXR8

These injectors were standard equipment on the VR GTS bogadore.

http://www.commsport.com.au/category40_1.htm

Jase_ELXR8

also check here

http://personal.inet.fi/koti/sivut/suutin.htm

I8AHSV

Now I'm confused....VR GTS = 215kw these injectors are suposed to flow 18.9lb with 47.9psi according to the web page that is provided which means that if used in ford behind 40psi of presure they would flow less. OK

What I wanna know now is

A. Should I buy/use these injectors on my ford V8?
B. What's the maximum power of the injectors capability in bhp?
C. Has anyone used them or had any experiance with these injectors?

I8AHSV

Can someone tell me the model number of bosch injectors that are fitted to EF-EL Falcon 6 cylinders.
It should start with 280-150-???

Also doen anyone know of any car/model that is fitted with decent size injectors(around 24lb to 30lb) that can be used on the EB-EL Ford SEFI V8 please include the model number of the injectors if known, the flow rate & price, car wrecker/shop that has them....I am on a tight budget at the moment because I spent $$$$ on the new intake, throttle body, EGR Spacer...etc

ebxr8240

Convert to c.c then compare,don't know formular... any one know..... Some one posted on here that he used 3.5 V6 Mitsi injectors and had no probs..

The latter model 200 kw injectors are dark blue, but I think they have a different elect. fitting...

Have you considered buying a fuel pressure regulator and uping the pressure some??? Say aftermarket and getting them crimped on by Pirtek or some hose place???

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...