Ford Forums banner

Plenum Question

1K views 1 reply 2 participants last post by  EDFUTURA 
#1 ·
Hi,
Just wanted to know if a EF/EL/AU 4.0L plenum would fit my ED XR6.
If so I'll then be able to fit a intercooler.
Thanks
Steve
 
#2 ·
Hi Steve,

Yes, the changeover works fine and is quite easy.

I've got an ED Futura (as ya probably gathered) - which is very happily sporting an EF Broadband manifold. I haven't got the switching working yet but have finally found a place in Australia I can get a suitable RPM switch from for about $160 so that'll be working soon.

You'll find that the changeover is quite simple once you have all the bits and are clear on the differences and similarities (what goes, stays or has to be modified) - I managed it in an afternoon.

You'll need to change the rocker cover and accelerator cable, and also if you've got cruise control you'll need to make some changes/modifications to get it working again.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top