b-juggles

Hey all,

Just wondering if anyone has recommendations for what brand pod filter to get to suit at '92 v8 falc. remember, that they have screw in MAF's, so a pod that preferably accomdates this would be good!

Thanks

EDXR8

I wouldn't really bother. You will either have to remove the airbox and suck hot air, or modify the airbox to allow the use of the pod. A K&N panel filter will give you more than enough air for most engine mods. If you do go for a pod filter, I would image you will either have to buy an adaptor, or make one up to allow the pod to bolt upto the MAF.

svo347

Or .... you could just buy a K&N Filtercharger which includes the Bellmouthed adapter plate within the kit.
Try A1 Performance in Myree, McKoy st.

__________________
FORD.... "POWER TO THE PEOPLE"...

Member of the "TKTDSGM " Group..

EDXR8

The Bellmouthed adaptor included will bolt onto the ford MAF will it? What rough price are the Filtercharger units?

b-juggles

yeah that sounds good svo 347...where is myree though?

PHoeNiX_EB

Yep your right, It does suck in hot air from the engine but only when stationary. A good heat shield will help a bit.

b-juggles

I'm gonna build a clear perspex box around the unit and duct air to it. so yeah hot air wont be a problem in the end...

honer

I would much rather keep the airbox and use a K&N filter panel, or you could just modify the airbox to put a Pod into it like EDXR8 said.

I lost power my 5 litre with a pod. Went back to airbox and just used a K&N filter panel

blueoval

I modified my existing air box, cut a hole in the bottom and into the inner guard and used flexitube and faced it forward. Ya cant see it unless I was to point it out to ya. And it cost $50 and 20mins to install.
Cheap and effective!

PS I also have a K&N panelfilter in the airbox too which aids the airflow too. A must imo.

__________________

2000 AU2 75th Anniversary Futura

SUPERCHARGED & INTERCOOLED