toby123

Hey,
I'm getting Extractor's and a 2.5" exhaust put on my EF Fairmont tommorow, and its getting dyno'd too.
I was wondering what power i should be expecting from my car.

Thanks

P.S. also did all EF fairmont's (non ghia) come with ABS standard?

Thanks again

Toby

__________________
Getting closer to being finished!

Beefchief

I think I would expect around a 10rwkw increase for the inline 6, which is what I approximately gained when my EF Futura received extractors, 2.5" exhuast and hi-flow cat.

__________________
1995 EF Futura - Crow stage 2 cam & adjustable gear, K&N cold air intake, AU XR intake snorkel, Advance stainless steel extractors, hi-flow cat converter, 2.5" pipe, 17" ROH RT shadow chrome mags, Pedders sports ryder suspension, DBA gold cross drilled/slotted rotors, lowered 1.5", camber kit, engine + starter immobiliser and microwave sensor security system.

Teh funnay is now linked here!

EFFalcon

hard to guess what you will get on a dyno, it depends on the dyno and other factors, but i'd expect about 110rwkw if its in good nic :)

__________________
1995 EF II Falcon GLi: Heritage Green, 4spd Auto, AUII 17" Rims, Custom BA Front Bar, Lowered, Gas Research LPG, Clear Indicators, JVC MP3 Headunit, Phoenix Gold 6.5" Splits, Coustic 481QE Amp, Clarion 12" sub, Leather Seats, Power Window Conversion, 3.45 LSD, Pacemaker Comp Extractors, 2.5" Exhaust, Mandrel Bent Intake, High Flow Filter, Wade 1004 110 cam.

In Progress: BA XR Side Skirts, BA XR Rear bar, BA Shifter Handle.

toby123

well, its been dynoed and got

178hp @ the wheels or 132kw @the wheels!!!!!!!!!!!!!!

Not bad for a 190,000k 4litre!

and it was on a dyno jet dyno

im a very happy E series owner now :D

next is head work and cam :)

Toby

__________________
Getting closer to being finished!

PHoeNiX_EB

132rwkw? Sounds like too much for an EF with just extractors! I dont know if id trust that reading! I could be wrong tho!

Hot Ef

geez! id be happy with that! i agree with phoenix, sounds a bit steep for a EF6. but, maybe it is right, im hoping so anyway! off we go to the dyno!

Beefchief

Hmmmm I have a Crow Stage 2 cam and I get 119 - 120rwkw at two different dynos! Sounds like something is suspect....

__________________
1995 EF Futura - Crow stage 2 cam & adjustable gear, K&N cold air intake, AU XR intake snorkel, Advance stainless steel extractors, hi-flow cat converter, 2.5" pipe, 17" ROH RT shadow chrome mags, Pedders sports ryder suspension, DBA gold cross drilled/slotted rotors, lowered 1.5", camber kit, engine + starter immobiliser and microwave sensor security system.

Teh funnay is now linked here!

toby123

wednesday night street meets at the motorplex starts up on the 1st of october so we''ll find out then :)

toby

__________________
Getting closer to being finished!

EFFalcon

did u get a before dyno?
numbers seem a little high, but atleast you're very happy :D

__________________
1995 EF II Falcon GLi: Heritage Green, 4spd Auto, AUII 17" Rims, Custom BA Front Bar, Lowered, Gas Research LPG, Clear Indicators, JVC MP3 Headunit, Phoenix Gold 6.5" Splits, Coustic 481QE Amp, Clarion 12" sub, Leather Seats, Power Window Conversion, 3.45 LSD, Pacemaker Comp Extractors, 2.5" Exhaust, Mandrel Bent Intake, High Flow Filter, Wade 1004 110 cam.

In Progress: BA XR Side Skirts, BA XR Rear bar, BA Shifter Handle.

toby123

yeah i did
well the 178 is actual hp
but the initial reading was 172hp at the wheels :)

and before was 152hp i think at the wheels (which sounds right for a 155kw at the fly wheels motor)

toby

__________________
Getting closer to being finished!