kegs ute

Gday i would like 2 know if it is possable 2 put an XR8 throttlebody on an EL XR6 ? Are the XR8 throttle bodys bigger and if they are would it give any advantages? And what about Tsearies throttle bodies? they r differnt again arnt they? if anybody can can shed some light on this subjuct for me i would appreciate it alot ,thanx Kegs!

sjwau2xr6

Larger throttle bodies on the 6's amke them harder to drive at low speeds etc as you get a larger amount of air in for a small movement. The T series (5.6L) has a cam arrangement on the throttle body to make them easier to drive down low. Save your time and money. Herrod will also tell you they are a waste of time.

Paul

No and No..

sjwau2xr6

If no and no why don't you call them and speak to them!

jase_elxr8

86mm for the 5.6 is way too big!!!

ebxr8240

I meant no to the above thread.Not what you said.I agree with you..v8's up to now have 65mm t/bodies. Same size as i.l 6's..

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

sjwau2xr6

to ebxr8

Sorry to get tetchy but it seemed as you were saying that I was wrong. Obviously not, my fault.