blackxbhardtop

Anyone had any experience with turbocharging a cleveland?

Have a cleveland with pretty mild bottom end, std side polished/shot peened rods, deburred cranked hypereutic pistons, externally balanced with h/v oil pump and oil restrictors.

heads closed chamber with mild porting and a custom inlet which i will redo for forced induction.

I was hoping someone could suggest correct turbos from experince with a similar engine.

Thanks.

ebxr8240

Depends what power you want to make ??? Up to 600 h.p with no lag two T3's with .63 rears..Two turbo's off the U.S 2.3 turbo 4 cylinder or the Volvo turbo X's two .If motor is warmed over the T04 tubo is the way to go with almost any combo you want...Or a single T66 or so...

Check www.turbomustangs.com Not too many turbo Clevelands but there heaps of 360 and 400 Chryslers...Windsors...

Some U.S turbo kits with specs...
http://www.turbomustangs.com/redirects/kits.htm

Another
www.corral.net/forums/forumdisplay.php?f=312nds

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

blackxbhardtop

Thanks for the leads! and the cheap alternative using production parts.