EA Turbo Clone

I am currently running 10psi intercooled turbo through a modified straight gas motor, the motor has a completely stock top end on a strenghened bottom end.

I was just curous as to what power other people are getting with similar boost etc. and what other mods they have done to get it.

__________________
Red EA Fairmont Ghia
Straight Gas Turbo'd at 15PSI, and happy for now.
Water to air intercooled
Sitting on koni and kings combination

ebxr8240

Old mill 270 rwkw @ 7 Lp 5 Litr V8 trick Flow heads & inlet...

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

EB SIX ON N2O

6psi on a stock 6 making 194rwkws.

only limited by 24lb injectors

__________________
gone to ford forums.com.au.............

EB SIX ON N2O

how much are you putting out??? ea turbo clone

__________________
gone to ford forums.com.au.............

EA Turbo Clone

unsure at the moment, last dyno it was 195rwkw at 10psi non intercooled, and it has picked up significantly with the intercooler, but wouldn't have a clue as to how much until i get it dyno'd again.

I am more trying to get an idea of what i should be getting, as to wether or not my setup needs more attention.

__________________
Red EA Fairmont Ghia
Straight Gas Turbo'd at 15PSI, and happy for now.
Water to air intercooled
Sitting on koni and kings combination

EB SIX ON N2O

what you got sounds bloody good.
good figures before cooler.

__________________
gone to ford forums.com.au.............

NAPARM

209rwkw (279rwhp) @ 9psi *need more power!*

EA Turbo Clone

Today i had fitted 3inch mandrel bent exhaust all the way, so that has a rather impressive power gain, and i am now running 15psi, so i will be going shortly to the dyno and will be able to tell.

That figure of 195rwkw's was actually higher than 10psi, because the car had 10 in first and 13psi in second and third, so it was probably more like 13psi, but couldn't tell you honestly as i was to busy watching the screen on the dyno and couldn't see the boost gauge.

The turbo i am running is a IHI RHB6, ball bearing turbo that flows 450hp, so i'm now running near its limit at 15psi, so i won't be going any higher.

__________________
Red EA Fairmont Ghia
Straight Gas Turbo'd at 15PSI, and happy for now.
Water to air intercooled
Sitting on koni and kings combination

EA Turbo Clone

Besides each time i get more power, 5 take off's later and the car doesn't feel any faster to me, i get used to it to quick.

__________________
Red EA Fairmont Ghia
Straight Gas Turbo'd at 15PSI, and happy for now.
Water to air intercooled
Sitting on koni and kings combination

EB SIX ON N2O

hehe aint that the truth.

__________________
gone to ford forums.com.au.............