Low_Ea

hey guys i got my lines made up for my turbo converison, but i need to know how to get to the oil sender, do i need to take of all the injection to get to it, or is there are easyier way and also i need to do the line to the sump, how do i go about doing that to

any help would be great


Cheers Allan

EDXR8

The oil sender can be removed from underneath the car although it is still difficult. As for the sump drain back, if you don't want to remove the sump, you should use a punch to punch a hole through the sump slightly smaller than the drain fitting and then tap the thread. Make sure you use a fair bit of grease on the tap so the metal bits stick to the tap and don't go into the sump. Also the drain should be up high on the sump, above the oil level.