EB Gli gets an LCD CLuster
hey guys. i'm upgrading my GLi povo cluster to an LCD one and i've got a problem with my speedo not working. i've connected everything as per the pin outs on fordmods.com in the tech docs section so assuming those are correct then everything should be working (and most stuff is).
my problem is that my speedo doesn't work (it illuminates and shows 0 tho) and so my gearbox is also stuck in limp home mode (coz it doesn't know how fast im going). i blew my hazzards lights fuse while doing the cluster install so i obviously touched two wires together that i wasnt meant to so could i have fried the speedo sender at the same time? i currently have pin 4 of the 12-pin connector as the red wire and pin 5 as the white wire.
EBII 4.0L Falcon GLi | T5 | 3.89 Spool | POD | Extractors | Alted Stg1 Cam | B&M Launch Control | Lowered | EF Thermo's | Twin 2.25" Zorst | 139.5rwkw