Tracey

i have a 1995 ef fairmont ghia v8...

my cruise control will switch on but when i hit the accel set button all i hear is a click noise and the cruise control wont take over....

i have heard about the brake pedal adjuster but i cannot locate where it is....

anyone got any ideas on wat the problem may be ?????

Sump Plug

Your cruise control modulator may be starting to die, I had mine replaced 12 months ago it was doing something similar to what you are explaining.
But it could also be a loose wire to your accel set switch.

__________________
TO ALL THOSE RICE BURNER DRIVERS : ONLY MILK COMES IN TWO LITRES

TIKFD6

Mine does the same thing on the clutch pedal.
I have to pull the pedal up with my foot to set the cruise.
The switch is located behind the brake pedel shaft.

Lander

Mine did the same and it turned out to be the brake pressure switch on the master cylinder. Test it by removing the connector and jumping the terminals in the wire with a thin piece of wire and go for a drive (the brake pressure switch is normally closed and failed open).
Also, it wouldn't work with the lights on once after a service when the bogan put a stop/tail globe in backwards (caused a backfeed through the stoplamp circuit).

Cheers
Charles