Re: electric mirror conversion
The mirror setup is not complicated as long as you get some of the wiring with the mirrors.
There are basically 4 wires between the LH and RH mirrors plus +12V and neg.
You need the wires that come out under the A pillars on each side when you get the stuff out of the donor car. Then you can run 4 wires between the mirrors, 1 wire to negative and one wire to the accessories circuit.
I can send you the wiring diagram if required.
The XR family ---->
Muzza: a XR8 AU seriesIII...bog standard :)
TBH: (the better half) drives an ED XR6 wagon (Mock Dev 4 160rwkw, JMM extractors, 4 electric windows, Ghia door panels in XR trim, rear head & arm rests in XR trim, Momo s/wheel with Cruise, EL thermos, EBGT wheels, etc) things to come soon = EECV upgrade.