V8 Ford Guy

I need some guide for where i could put the wiring through the firewall on a DA fairlane. Any help would be appriciated, Thanks!

DansEdgli

try finding any rubber grommet with nothing going through it. Look for it on the engine side.
If you find one rip it out and drill a hole through it and pass the wire through and put it back in place.
Try also above the accelerator and to the left next to the hood release. Thats where i fed mine through. It was an only an ED falcon tho.
hope this helps
dan

LTDHO

I run basically the same (CAR) body as you. I ran mine through a hole, I cut, under the steering shaft. There is a circled flat patch (If you know what I mean) and I used a rubber grommet..

If you are using a smaller cable, 8 gauge, the clutch cable hole will do..

__________________

MADNC_8

mine is through the grommet where the bonnet pull cable is although i dont have the amp yet haha some time soon though