Ford Forums banner

Tickmod 2 - EA Fairmont Ghia interior conversion

1K views 0 replies 1 participant last post by  tickfordboy 
#1 ·
I recently picked up an EA Fairmont Ghia as a trade in at work and decided to fit the velour interior into my standard EA GL. To do this you remove the door trims off your car, and sit the ghia trims in. of course the electric windows didn't have a winder, so what you do is fit the trim where it should be, then punch the trim carefully to make an indentation on the back where the winder will be. Drill the holes and they fit. Remove the electric window switches and lighter setup in the rear trims, and block the hole off with a nice piece of woodgrain with a tickford badge to clean the trim up. This looks magic when done. The seats bolt straight in, and the roof lining is the same, just unplug one plug and your set. All the extra lights in the cab work when you plug the loom in. Change the sun visors and your finished. All up this took me haf a day.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top