XR8 XR6 Club of Victoria
Join Date: Nov 2001
Location: Melbourne, Australia
EL to EB mirror translation
OK the wiring of the mirrors is not so different between the EB and EL.
Red wire on the EB is same as Red on EL
Violet wire on EB is same as Violet on the EL
Blue on the EB connects to Dark Blue on the EL.
Black to Black
Violet/Red to Violet Red.
Note that there are seperate Violet and Blue (D Blu in EL) to each mirror going into the switch so only issue to to make sure the V and D-B wires are correct.
LH door connector in your EB has 4 pins and RH (drivers) door connector has 6 pins with 5 wires.
The EL has one 8 pin connector
1 - Dark Blue to LHS
2 - Dark Blue to RHS
3 - Red to both mirrors
4 - Violet/Red +12v
5 - Violet to RH mirror
6 - Black - chassis
7 - Violet to LH mirror
8 - spare (empty)
EL Pin layout
The XR family ---->
Muzza: a XR8 AU seriesIII...bog standard :)
TBH: (the better half) drives an ED XR6 wagon (Mock Dev 4 160rwkw, JMM extractors, 4 electric windows, Ghia door panels in XR trim, rear head & arm rests in XR trim, Momo s/wheel with Cruise, EL thermos, EBGT wheels, etc) things to come soon = EECV upgrade.
Last edited by Muzza; 07-13-03 at 04:36 AM.