cold/heat blower problem - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

shortstack · 07-10-2007, 01:20

just got a 98 explorer Eddie Bauer edition and for the blower its either ALL (max) or nothing even if its just one notch down. is this a typical problem or what?

onree · 07-10-2007, 03:01

hi i had this problem on a rover i bought i changed the switch and it was fine hope this helps gary.

backlash1 · 07-10-2007, 05:15

Quote:

Originally Posted by shortstack

just got a 98 explorer Eddie Bauer edition and for the blower its either ALL (max) or nothing even if its just one notch down. is this a typical problem or what?

Hi
This is normally caused by the fan resistor going open circuit. Leaves the blower fan working on max speed only. You need to disconnect it and do a resistance check on it. cheers
marc

GJSmackdown · 07-10-2007, 18:15

Most likely the blower motor resistor. But also could be the fan switch. I'd bet on the resistor. I had the same deal. Was hoping it was just the switch but it wasn't.

Johnny Mullet · 07-12-2007, 20:07

I also bet on the resisitor.