Re: 2008 Navigator Front Bumper R/R
You'll have to climb under. Most bumpers are securely fastened with short bolts that you'll have to remove. If there's a lower plastic cover, you'll have to remove that first to access the bolts. The screws you see in the wheel wells are undoubtedly holding the wheel well liner on. You can remove these to make the bumper removal somewhat easier, but it won't drop the bumper. The bumper is installed to absorb a 5mph accident while transferring minimal stress to other parts of the vehicle (crumple zones). I'm guessing here that you should have 8-10 bolts securing the bumper in at least two different spots around the frame. You'll have to look.
'00 Durango R/T 360ci 290hp (modded); 138,500m
'06 Pontiac G6 GT 3.5L 220hp; 44,000m
'12 Chrysler 200 Limited 3.6L 283hp; 13,000m
'99 Taurus 3.0L 2V Vulcan 145hp; 154,300m - Traded
Amsoil in all vehicles!