TaraHymen

has anyone got the 5 stud conversion on the front which uses the WB(i think) girlock caliper? if so do u know what wheel bearings are used. mine has spun a bearing and i have lost the number on the inner race as well as the seal has desintergrated so i dont have a sample to match up.

thanx in advance

__________________
TD Cortina ED XR6 Engine, T5, 9inch, Boyd billets, 4 wheel disc etc
AU XR6 - All the usual goodies not worth bragging about

See them both here <=-- Page Updated 15 October 2006

Racer

Its been a while since i did mine, but it used either the HQ bearing or th XY one. I dont remember which, but it was one or the other.

ps
The bearing number should be stamped on it.

TaraHymen

cheers racer but i couldnt get the number off the inner race because it had "wiped" off when the bearing spun. i too the whole hub and a set of verniers down to repco and they ended up being XD-F wheel bearings. thanks anyway

__________________
TD Cortina ED XR6 Engine, T5, 9inch, Boyd billets, 4 wheel disc etc
AU XR6 - All the usual goodies not worth bragging about

See them both here <=-- Page Updated 15 October 2006