05 Freestar, wire no Fire
I have the 3.9L Its been running rough and was registering the Blinking (engine)indicator on the instrument Dash display- Manual said engine is mis-fire. I removed the Wiper blade shrouds and replaced the wires and plugs, I did notice that the #4 plug was damp. After reinstall preformance seemed better but still mis-fire. I pulled several wires(# 5 than #6) and installed a plug to test for spark to ground and had ark to ground. When I test the #4 wire and I get no ark when testing to ground. In trying to figure what I need to do next, I dont know what I need to do Or what I need to Check. New wires, new plugs I have no info. as to what would be next since its not like the good old days. Its got like DIS ignition systems and cant find info.