mysonthehero

i've put new injector,wires,plugs. coil checked, does any1 know the specs for the coil. noid light did not lite on #6. it lite on other injectors. i have an ohm meter, wire checks out from puter wiring harness to injector # 6 harness. what is the volts from puter to injectors supposed to be. could it be puter. thanks for the help.

Bert

I'd say the PCM is probably the problem. The noid light would show if it was trying to trigger the injector. The injector resistance should be 11-18 ohms and the peak amps should be .65-1.1amps.

__________________
Bert