Grant218

my 2001 F 150 supercrew 4.6 just had new motor and tranny mounts put in and a new fan clutch and whenever i hit a bump in the road the truck just shuts off! the radio and air conditioning stays on aswell as the lights but the oil and abs light pops on and then the truck shuts off! also the wipers don't work anymore! what the heck is going on with my truck?

__________________

"horse power gets you there, torque keeps you there"

Bert

Sounds like you should take it back to whoever did the work and tell them what's happening. A poor connection or wire rubbing through is a guess. I'd have them look at their work and see if something's amiss.

Grant218

its going back to the shop tomorrow, another thing thats wrong with it is that the wiper suddenly don't work either and i replaced the relay switch and they still don't work. the reason i have posted this is because i want to see if someone has had the a similar problem or someone might now what it is because i have known the shop owner for 17 years and my grandfather has known him for over 40 years but i think his mechanics screw up my truck on purpose so i bring it back. all service done by them has a 12 month 12,000 mile warranty so its free if something breaks that they replaced but i'm getting tired of it because there is always something wrong with it every time i get it back from them and ford dealerships charge wat too much for service so this is my only option

__________________

"horse power gets you there, torque keeps you there"

Bert

The wipers could be something not connected after the work. They could just have made a mistake and not to get you back. If the shop owner is trustworthy, he'll take care of it. Everyone can make a mistake. I have to admit I've done some myself. I didn't mind fixing my mistake. If they're making a lot of mistakes, the shop owner will be able to do what needs to be done with them. Good luck.

Grant218

thanks, it just gets a little fustrating sometimes

__________________

"horse power gets you there, torque keeps you there"

ymeski56

Run error code scans. KOEO & KOER. You should find the culprit logged in the Continuous Memory! Entries don't require the CEL light to activate.

__________________
"Saving the World......One Ford Truck at a time!"