fordrebel

hey i got a 1992 f-150 4x4 with the 5.0L and im swapping that out and putting in a 460 into it but im wondering if there is a kit i can buy for new motor mounts or do i gotta make em or will it bolt right in it came out of a very early 70's intercepter and if my t-case will bolt up to the c-6 tranny that it came with

thanks aaron

chipset

good luck. Nothing fits. What are you going to do with the original suspension that will
not hold up the 460 ? What are you going to do about the torque the 460 has over the original 302 drive line ? Your putting a car motor in a truck!!!. Oooooookay. good luck.

jerrysf

I bought a 89 f250 that had a 302 and had a 429 swapped into it(same block as 460) and it came out of a mercury marauder(car) and the guy told me he got his swap stuff from a company i believe called L&L i believe they are based out of texas but they do motor mounts, headers, pretty much everything to swap that block into anything i guess from a broncoII all the way to a big full size...but i do agree you will probably wanna beef up your drive train a little bit to withstand the extra power

jerrysf

I should have looked it up for when i posted earlier but here is the link to the L and L site...hope it helps...

L&L Products