Bumping noise in front end - Ford Forums

wallacrj · 04-26-2006, 18:47

I have a 2001 F-250 with a fab-tech 8" lift and 38" super sampers. I jumped my truck and put it through a lot of abuse one weekend about a year ago. Now I have a bumping and slight rolling grind when ever I hit a dip or turn a corner.. I have replace my wheel bearings, shock brakets, steering box, shocks, and I have one last optoin but I'm tierd of replacing stuff that does not fix the problem.. The last option in my front knuckles. any suggestions

onetonfordfun · 05-04-2006, 17:55

I own a 4X4 shop, almost all SD's need front sway bar bushings. Grab the bar and pull it up and down it will probably move. Replace them with Energy Suspension bushings. I replace them on every liftkit I install. I know you said you replace the wheelbearings but another problem is the spindle bearings. The run dry and groove the axle, if this was the problem with the old wheel bearings then the axles may be junk!

Futuresweets-10 · 06-05-2006, 07:26

Quote:

Originally Posted by onetonfordfun

I own a 4X4 shop, almost all SD's need front sway bar bushings. Grab the bar and pull it up and down it will probably move. Replace them with Energy Suspension bushings. I replace them on every liftkit I install. I know you said you replace the wheelbearings but another problem is the spindle bearings. The run dry and groove the axle, if this was the problem with the old wheel bearings then the axles may be junk!

Can you give me a P/N on the energy suspension businghs or a place where I can buy them? thanks.