i am putting a 351 Cleveland in my my 1977 f150 4x4 it had a straight 6
i need to know if the engine mount from a 351 windor are the same as the 351 cleveland and if not where could i get mount adapter mounts
The mounts are completelt differant, sorry. I went through this with my Comet several years ago. Also, your swap is somewhat eccentric and you will have dificulty finding them aftermarket. They range around $100. But you may get away with buying some 351 mounts for that vehicle and see if they line up, go to an auto store and ask to see one. they have a pin that goes through to mount to the frame. If your 200/250 mounts do the same you may be golden. If not, go to a welding shop and ask how much a fabrication will cost. this may run you from $100-$200.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ford Forums
1.4M posts
115.4K members
Since 1999
Ford Forum is a community to discuss all things Ford. Check out our discussions on the Ford Escape, Mustang, Edge, F-150, Raptor, Explorer, Focus, Fusion, Fiesta and more!