FastFord79

Hey guys.. im new to the site and im lookin for some info..

Me and my old man are rippin appart a old 79 F150.. came with a 4 speed trans, and 300ci 6 cyl..

Looking into doing a transplant, but not sure what to do as far as a engine and trans goes..

Would like to keep the 4 speed if possible but would like to drop a 351, 400, or a 460 in it..

If non of these bolt up to the stock trans.. what will bolt up to those motors and roughly how much off hand would you think its gonna cost outa pocket?!

Would this stock trans have the same bolt pattern for these motors?

Thanks guys..

Feel free to email me at. Bombsquad250r@Gmail.com..

FastFord79

Bump.. anyone!?2

jwko

I don't see why the 4 speed would not bolt up to any of those blocks. I may be wrong, but I think the 4 speed would be pretty much universal.

Anyone else care to ring in on this question?

bigredford

now are you looking for 2wd or 4wd? and the cost really shouldnt be bad im lookin to buy a 351W for mine and its only 1,300 with like a 2 or 3 year warrenty if your looking to do a 4wd look to spend about 200-250 on a transfercase i got mine from a junk yard for 150 because i new the guy and it only had like 9,000 miles on it and the transmissions i havent really looked into a whole lot because i havent got to that point on mine but id be guessing dont quote me on it but about 500 give er take. im just estamating.

bigredford

but with a few mods you should def. be able to get the tranny on any of those blocks.

FastFord79

ALright thanks guys..

The trucks 4X4 BTW.. and im just lookin to see what im gonna wanna do.. either rebuild the 300 6cyl in it and possibly get a crank and retard the timing on it with a high lift cam, or if i should just go 351 or 400, or possibly a 460.