TooSlowMonroe

Guys: 2002 F250 SuperDuty. Has stock suspention. How large a tire can I put on here? Some guys at work say 315/75s. Any ideas from anyone that has done this?

Thanks.
TooSlow

360ci

I'd stay under a 35" tire....if you go bigger you'll want to upgrade to a lift or stiffer suspension so the tires don't rub the frame when driving over pitted roads. Planning to upgrade the gears too I hope! I'm guessing you want to go with aftermarket rims? If so, with the right offset 315's should fit without rubbing at full turn.

__________________
'00 Durango R/T 360ci 290hp (modded); 138,500m
'06 Pontiac G6 GT 3.5L 220hp; 44,000m
'12 Chrysler 200 Limited 3.6L 283hp; 13,000m
'99 Taurus 3.0L 2V Vulcan 145hp; 154,300m - Traded
Amsoil in all vehicles!

gmaier

315's should run without any problems depending on how much the front end sags if any. if it does sag i would atleast level it up you can find kits on ebay anywhere from 80.00-300.00

TooSlowMonroe

sweet. Thanks guys...AUGH...guys at work were right...I hate it when that happens.
-TooSlow

kappycdk

35 bearley rub on stock rims