shortyf

hi ordered a comp cams 276 ah-10 but cam card gives no spring specs
called comp cams 2 different times and got 2 different numbers one is 924-16 the other is 926-16 confused on which to use if either?
also whats a good full gasket set kit

thank you

omc king cobra decked block
stock crank
forged flat tops
d3's ported
valve guide bosses cut
stainless valves
victor intake
850 marine holley
crane hi 6 ignition
msd distributor


any help thank you

Paul Kane

If you have D3VE standard-length valves, then the 926 springs will work with their intended 1.82" installed height and open/seat pressures, as the 926 single spring/damper package.

If you have D0VE standard-length valves (~0.100" long in a D3VE head), then the 924 springs will work with their intended 1.900" installed height and open/seat pressures BUT you need to futher modify the D3VE heads in order for them to properly accept the 924-16 which is a dual spring w/damper.

Paul

__________________