KILLERME

Was wondering if could get an injection system off a wrecked late model v8 falcon/fairmont and fit it to my 8, just thinking bigger injectors, nice 1000 cfm throttle body. It must be possible, or would it be quicker to get it from the USA/ wreckers , complete set up for 460 truck/motor hm?
If you have any clues let us here them
Cheers TYRFKA

Epitome

I'd get a genuine US F series 460 injection system.

Or you could talk to OZrace about a RON's "Flying Toilet" injection system. These are made for drag racing and methanl in particular. However, they can be re-jetted for anything. Many drag racers are finding that a switch from say Holley Dominator to a Flying Toilet improves power and driveability of their cars and results in a significant improvement in ET's.

__________________
Kel.
Epitome Racing
A/MD 1272
468 Big Block Dragster
10.45@132mph

*i2ayman*

i'd keep your eye open at swap meets etc for a holley pro-jection system if you already have a decent intake etc.

__________________
EF XR8 Manual
Mods: Polished GT40 intake/Engine cover, FMS Phenolic spacer, 65mm FMS T/B, 70mm MAF, Underdrive pullies, Crane 1.7 rr's, genie extractors, TV/In car computer/DVD

ebxr8240

Found it!!!
This get you motivated???
http://snow.prohosting.com/~johngift/intakefab.html

__________________
Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic!
.
Tuned & maintained by "Peppertree Perfmormance". Dart block, Scat 4340 steel crank, Custom C.P pistons.Oliver rods.. Mal Wood twin plate clutch.. Twin SC61/2's,482 rwkw/ 645 rwhp..
Passengers, myocardial infarction material..
R.I.P Possum...

KILLERME

cheers guys , thanks for ya Ideas.. much appreciated

xc460

Another idea not to forget is the FLYING TOILET set up available through oz nos , I saw this set up on rob maddens 7 second camaro at the summernats . The system is very impressive and economical to set up ...

reece1

that is awesome the finished product is a individual peice of motor art.it looks like a bought one.

reece1

there is also a great injection manifold with twin throttle bodys in the latest just parts magazine aust. looks like a exeptional piece of work. would still need a stack of items to finish it off though.
what is your vehicles purpose? do you want injection purely for economy and smoothness or more performance related issue.

KILLERME

This is what I have found, and look and sounds like a good option, 900cfm too.
http://cgi.ebay.com/ebaymotors/ws/eB...MEDW%3AIT&rd=1