Re: ED Falcon Front Bumper.
Ok I will guess the same as an EA, 6 bolts in all.
inside the wheel arch (drivers side), towards the front right (near radiator), (front left passenger side near radiator as well), there are two 14mm (?) nuts to be removed, on the left will be behind the ABS (charcaol canister on an EA), and one holding the metal bar to the side of the bumber, straight up 13mm (?) bolt, bults up into the engine bay, near the headlight rear mounting point, then sorta wiggle, and wobble the bumber off, the horns will need to be unbolted off the bumper as well 10mm (?) bolts.
Putting back, make sure the plastic nobs, go back into the plastic guides on the front guards (will make sense when removed), and do the bolts back up.
As said thats an EA, and it was easy to do, I guess nothing changed too much.
I did put something here, but it vanshied, I think
"So long and thanks for all the fish!"
Last edited by Dellboy999; 11-30-2003 at 16:29.