mad_ea_spac

i was just wondering if just ordinary primer automotive will do for spraying side moulds and respraying front & rear bumpers plus a spoiler (metal) i know it wll work on the spoiler but howbout the rest

it will also be used on door handles, mirrors, garnish and a few other plastic things... so what you recomend? BTW i don't have the paint yet so what to get is flexible

__________________
1994 ED Ford Falcon Gli wagon, polynesian green, 4speed auto, dual fuel, spac cluster, 3.27ss diff,pioneer DEH3600 head unit, trip computer, ED fairmont grille, EF T-bar

Mods to come: 2.5'' lukey cat-back mandrel bent exhaust with 1 resonator and 1 straight thru muffler, EF cam, Clear indicatros all round, AU3 XR snorkel, 17" Keizzer rims, EDxr front,12"sub,sports wheel

In Progress: EF door trims


Pics Here: www.edwagon.tk

Falcon_Spac

I think its called flexi-prime for the side moulds, and when i did my bars i used ordinary primer and it still looks good, over 1 year later

brenx

On plastic any auto primer works. If the metals bare metal you'll need to use etch primer 1st, then primer and then top coat.

Brenden

__________________
XB Fairmont (street car) 11.07@123.02mph.

ford_forever

plastic tech primer for just the plastics or Epoxy primer for bare metal and plastics - either one Is what I use .

but ordinary primer should hold up quit good aswell ..

TIKFD6

Fior the side moulds and the bare plastic on the bars, use plastic primer, then an undercoat, then colour.

Same for the handles and other bare plastic parts.