Axeman82

I know this is a technical question but this is the place where is will get answered quickest

How do I take the rear bumper of an EA? I assume then the tank just drops out once the straps are undone?

Dan..

__________________

John_xr6

undo the 4 bolts on the inside of the boot under the carpet and also take out the screws where mudflaps would normally be and the just slide the bumper off. did it on my EA about a week ago.

__________________
1994 COBALT BLUE ED FAIRMONT GHIA
Next Mod - T5 Manual Conversion
Pics Here

Axeman82

Don't worry its been answered - LOL..

Delete this thread if ya want..

Dan..

__________________

mad_ea_spac

just slide it off? what if you have a tow bar there does it affect it?
i gonna have to do it soon

__________________
1994 ED Ford Falcon Gli wagon, polynesian green, 4speed auto, dual fuel, spac cluster, 3.27ss diff,pioneer DEH3600 head unit, trip computer, ED fairmont grille, EF T-bar

Mods to come: 2.5'' lukey cat-back mandrel bent exhaust with 1 resonator and 1 straight thru muffler, EF cam, Clear indicatros all round, AU3 XR snorkel, 17" Keizzer rims, EDxr front,12"sub,sports wheel

In Progress: EF door trims


Pics Here: www.edwagon.tk

Troutman

You'll have to remove the tow ball, and yes it slides off.

__________________
Jack Travis, E-Series Acting President

1989 Ford Fairmont Ghia turbo/GL replica (underway)
1994 Eunos 800M
1990 Ford Laser S

mad_ea_spac

good i thought i'd need to remove the tounge this should make the job easier
also does any one know how to fix a saging rear bar
i dont care if it's dodgy just want it looking good for once i sell it

__________________
1994 ED Ford Falcon Gli wagon, polynesian green, 4speed auto, dual fuel, spac cluster, 3.27ss diff,pioneer DEH3600 head unit, trip computer, ED fairmont grille, EF T-bar

Mods to come: 2.5'' lukey cat-back mandrel bent exhaust with 1 resonator and 1 straight thru muffler, EF cam, Clear indicatros all round, AU3 XR snorkel, 17" Keizzer rims, EDxr front,12"sub,sports wheel

In Progress: EF door trims


Pics Here: www.edwagon.tk

mad_ea_spac

BTW it has to last not drop off after a little while i mean what i'm gonna do is knock the support higher or something
i'm gonna inspect it and if i find a way to fix it i'll tell youse
cause the ghia i'm after also has a rear sagging bar

__________________
1994 ED Ford Falcon Gli wagon, polynesian green, 4speed auto, dual fuel, spac cluster, 3.27ss diff,pioneer DEH3600 head unit, trip computer, ED fairmont grille, EF T-bar

Mods to come: 2.5'' lukey cat-back mandrel bent exhaust with 1 resonator and 1 straight thru muffler, EF cam, Clear indicatros all round, AU3 XR snorkel, 17" Keizzer rims, EDxr front,12"sub,sports wheel

In Progress: EF door trims


Pics Here: www.edwagon.tk

John_xr6

get a different one. if its saging then its most likely the plastic posts the bumper bar iron screws into have broken/breaking off. also the plastic clip on each side end could be stuffed. just get one the same colour as the car, thats all i did when i changed my EA to have the grey band around it.

__________________
1994 COBALT BLUE ED FAIRMONT GHIA
Next Mod - T5 Manual Conversion
Pics Here

mad_ea_spac

bah nothing a little bog, fibre glass and superglue cant fix
y should i go out and spend $$$ on a new/used bar?lol

__________________
1994 ED Ford Falcon Gli wagon, polynesian green, 4speed auto, dual fuel, spac cluster, 3.27ss diff,pioneer DEH3600 head unit, trip computer, ED fairmont grille, EF T-bar

Mods to come: 2.5'' lukey cat-back mandrel bent exhaust with 1 resonator and 1 straight thru muffler, EF cam, Clear indicatros all round, AU3 XR snorkel, 17" Keizzer rims, EDxr front,12"sub,sports wheel

In Progress: EF door trims


Pics Here: www.edwagon.tk