sheebee

EA Ford Falcon has 4.0 litre muilti pt injected died on me, checked spark, fuel to fuel rail, valve timing, all okay what could be the problem. still won,t start.

 

hoon69

battery
check ya sensors etc
fuses
ecu
fuel pump

ea's are 3.9ltr did you do a motor swap or something?

__________________
cars are a lethal weapon,your not invinsible when you get into one,and no matter how much skill you think you have,you are never in control you are always on the edge of death it may not happen today but if you keep driving like you do,you too will end up dead!

jluyt

I recently had a similar problem with an EB 4.0 injected Falcon. I had pleanty of spark at the plug-end of the lead and was baffeled.. it turned out that when I removed the plugs (which looked like new) there was no spark through the plugs.. Apparantly the Auto Parts guy told me that NGK plugs foul up easily and fail. I replaced the plugs and it started perfectly.

Bidju

Throwing my 2 cents in here: check MAP sensor, check all the little vacuum hoses especially the one to the MAP sensor.

Check all the wires connecting to the battery have a good connection, my EA has heaps.

What exactly does it do? Turn over but no start?