Jake_101

Hi all, I've decided to get a uni-chip installed, and was wondering where the best place to take my car would be? I live in canberra so i'd probably have to travel to Sydney. Any ideas?

BlueAU

Im sure someone in Canberra would be a unichip dealer mate, maybe one of the Canberra members can point you in the right direction. Other than that, try calling around the local performance parts workshops.

Bluedriver

Look up the aps website to see if one's in Canberra, otherwise Autotech Engineering in Sydney has been getting great results for FF members of late.

__________________
'02 XR8 S111 220kw + a little more

jonbays

With the Unichip its the experience of the guy doing the live dyno tuning that you are really paying for. The interceptor box itself and fitting anyone can do (well almost) but the tuning requirs some knowledge and I would say Spiro at Autotech in Granville is buildin up some Ford Unichip tuning experience that means the drive to Sydney would be worth it.

__________________
AUII Auto wagon 4.0L InTech Pacemaker PH4480 extractors, 2.5" exhaust, JMM DEV3HL Cam Unichip 144rwkw. 1/4 mile 15.609sec@90.14mph

loxxr6

I'll second Autotech Engineering in Granville. Great guys.

However you may find someone closer to home here

http://www.airpowersystems.com.au/au...us_dealers.htm

__________________
Proud TQE Operator
1999 Black Manual AU XR6HP
Unichip equipped by Autotech Engineering, Granville
Cam install by Crescent Motorsport, Liverpool

Dyno

Timeslip

Jake_101

what other mods would go well with the unichip?
I am going to get extractors, but what else?

loxxr6

The Unichip (and others) will just make the most out of what your car can do. That is, they add power but only up to what your car is currently capable of. So, if you do more mods you'll get better results and be able to tune your car according to what mods you have.

Mine for example did 134kw with exhaust only. With the chip it bumped up to 146kw. Your factory computer can't properly make use of the changes you make to your car so the chip lets you re-tune it so it does.

I'd be looking at least exahust(inc extractors), maybe a better air intake. If you do internal mods eg cam, even better.

However even on a standard car you will see a difference.

__________________
Proud TQE Operator
1999 Black Manual AU XR6HP
Unichip equipped by Autotech Engineering, Granville
Cam install by Crescent Motorsport, Liverpool

Dyno

Timeslip

XRFPV8

hi here is a complete list for you to have a look at..
http://www.airpowersystems.com.au/au...us_dealers.htm

__________________





PHANTOM BA XR8 UTE, AUTO, UNICHIP, APS TUNED 229 RWKW ET:13.47.

Rods Rocket, Boss n/a 290 Unichip Tuned by APS et:12.6@110 Mph
We are all inclined to judge ourselves by our ideals; others, by their acts.

loxxr6

However you may find someone closer to home here

http://www.airpowersystems.com.au/a...aus_dealers.htm

Beat you to it !

__________________
Proud TQE Operator
1999 Black Manual AU XR6HP
Unichip equipped by Autotech Engineering, Granville
Cam install by Crescent Motorsport, Liverpool

Dyno

Timeslip

useless

Mate take a drive to Jim Mock motorsport if your keen .They have cams extractors exhaust and unichip......the lot and I guarantee them.Casper here on these forums recently got his car done without a chip or cam and they got his car from 106rwkw to 144!!!!The guys here in Sydney are good ...ie Spiro autotech..But if you want the package cam unichip etc.. Brendan and Jim are the guys to talk to