exhaust system for ef xr6 - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars

01-17-2002, 20:21

would any one no of a place where you can get a good system for an ef xr6 if possible i want something with a nice beefy note i no i might be asking the impossible as it is not an (

cyl but idont want to go some where and they fit one up and it sounds tinny if you no what i mean i live on the monington-peninsula so some where in that vacinity would be good if possible many thanks

01-23-2002, 03:31

Go to any reputable exhaust center and have them fit a Genie extractor and 2inch S/S exhaust. The car will be remarkably different and have a note to it. I know, I have fitted one to mine. An extra 10kw rear wheel!!!

02-13-2002, 16:35

HI,

For your XR, and a proven exhaust system fit this set...

LUKEY extractors, using your cat, COS its the large one already....UNLIKE EA TO ED......

fit a 2.5 " exhaust of your choice, straight thru. a redback system, or stainless genie system is good.....

THE EXTRACTORS are the main thing, also fit a good KN air filter......in an xr....upto 135kw at the wheels with these mods......

it took us ages to figure it out.....

regards, brenden Mock

myxr6 · 06-24-2002, 02:54

I have genie extractors and genie system , last dyno tune 102 kw rear wheels.On an ELXR6.

Tickford6 · 08-08-2002, 23:08

Does anyone know if pacemaker extractors are any good on EL XR6s (stock exhaust)? I have found a cheap set but want to spend my dosh wisely.

Any comments on extractors are appreciated.

Jamie XR6 · 08-09-2002, 02:35

Herrods have a range of systems to suit your car and budget. I just fitted their premium 2.5" system on my AUII XR6. Not only does it now have a nice deep throaty sound, it has increased power as well. The missus was telling me the other day how floored it next to the HSV club meeting and they all stopped to look.

These systems are designed for the car, not off the shelf like others.

Take a look at the mod page of my website below

08-28-2002, 05:57

I've fitted Hurricane (not mandrel bend) on my efxr6 with a 2 1/2 inch system, also moved cat back beside tranny and fitted k&n filter. Very throaty sound and plenty of power. Kids complain that it is toooo loud in the back...... Can't please everyone!!!!
This car had a Genie set on when I bought it and there was a very noticeable increase in noise and power when I changed extractors.

lEAsh · 09-14-2002, 22:25

Quote:

Originally posted by Grunt51
HI,

For your XR, and a proven exhaust system fit this set...

LUKEY extractors, using your cat, COS its the large one already....UNLIKE EA TO ED......

fit a 2.5 " exhaust of your choice, straight thru. a redback system, or stainless genie system is good.....

THE EXTRACTORS are the main thing, also fit a good KN air filter......in an xr....upto 135kw at the wheels with these mods......

it took us ages to figure it out.....

regards, brenden Mock

I have a EL Falcon with the Jim Mock Motorsport Extractors and 2 1/2" exhaust. On the dyno I got 129kw at the rear just with those 2 items.

laminge · 09-15-2002, 04:51

Unfortunatel the Dyno Figures at JMM leave alot to be questioned, however, what type of note have you found and have you noticed a better response range?

09-19-2002, 22:57

Just had the SVO exhaust upgrade fitted to my EL XR6 and it works realy well call Mick at SVO Ringwood Melb he is easy to talk to and has heaps of experience with fords. As you can tell i was verry happy with the performance and cost of the system.