"" wrote:
> I took my 2001 Focus to Auto Zone because my check engine
> light was on.
> They checked it and it showed that there was insufficient flow
> to the EGR
> valve. I have since replaced the EGR valve, PCV valve, spark
> plugs, fuel
> filter, air filter and have ran 2 bottles of fuel injector
> cleaner through
> the fuel tank. At this point I am still getting insufficient
> flow so by
> looking at the Haynes manual I asume that is could be the EGR
> solenoid, the
> EGR differential pressure sensor or possible the Oxygen
> sensor. Oh and the
> vaccum hoses are connected properly. Any suggestions on which
> of these last
> parts mentioned is likely causing my trouble? Thanks.
>
> Joe
I took my 2000 Ford Focus SE to AutoZone but they were unable to find
the place to plug in the scanner to pull the service engine code.
I’’ve looked everywhere and I can’t find it. Can someone tell me were
the scanner plug in is located.....many thanks
--
Posted using the
http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL:
http://www.autoforumz.com/Ford-Focus...ict120886.html
Visit Topic URL to contact author (reg. req'd). Report abuse:
http://www.autoforumz.com/eform.php?p=627583
Linear Mode
