"" wrote:
> I took my 2001 Focus to Auto Zone because my check engine
> light was on.
> They checked it and it showed that there was insufficient flow
> to the EGR
> valve. I have since replaced the EGR valve, PCV valve, spark
> plugs, fuel
> filter, air filter and have ran 2 bottles of fuel injector
> cleaner through
> the fuel tank. At this point I am still getting insufficient
> flow so by
> looking at the Haynes manual I asume that is could be the EGR
> solenoid, the
> EGR differential pressure sensor or possible the Oxygen
> sensor. Oh and the
> vaccum hoses are connected properly. Any suggestions on which
> of these last
> parts mentioned is likely causing my trouble? Thanks.
>
> Joe
Where exactly is the plug or connection for the engine code scanner.
The guy from AutoZone that tried to run the scanner was unable to find
it and I’ve looked everywhere for it with no luck....Please help
--
Posted using the
http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL:
http://www.autoforumz.com/Ford-Focus...ict120886.html
Visit Topic URL to contact author (reg. req'd). Report abuse:
http://www.autoforumz.com/eform.php?p=627622