jhmartin7

The brake pedal is very hard. I have changed out the master cylinder, and
now the brake light keeps coming on. How can I tell if I need to change
out the power brake booster? If so, how do I i get it off? I removed the 4
bolts, but I can't seem to get past the linkage.

Backyard Mechanic

"jhmartin7" <jhmartin7@hotmail.com> wrote:

> The brake pedal is very hard. I have changed out the master cylinder,
> and now the brake light keeps coming on. How can I tell if I need to
> change out the power brake booster? If so, how do I i get it off? I
> removed the 4 bolts, but I can't seem to get past the linkage.
>
>

You mean you cant get the linkage from pedal loose?

Do you have a book? Check used bookstores, ebay.

--
Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!

jhmartin7

So, I guess what you are saying is, You don't know either?

Bob

"jhmartin7" <jhmartin7@hotmail.com> wrote in message
news:d968df1c598a9c179620b5c4488b626e@localhost.talkaboutautos.com...
> So, I guess what you are saying is, You don't know either?
>
>
Look at where the booster linkage attaches to the brake pedal. Remove the
retainer clip and slide it off. Simple as that......

tom

you most likely took it apart at the wrong spot. to remove the booster, undo
the 2 nuts holding the master cylinder on and move it out of the way. then
from in the engine bay, there should be 4 buts behind the booster, between
the booster and mounting bracket on the firewall. very tight in there.
"jhmartin7" <jhmartin7@hotmail.com> wrote in message
news:d968df1c598a9c179620b5c4488b626e@localhost.talkaboutautos.com...
> So, I guess what you are saying is, You don't know either?
>
>