bigtee62

I have replaced plug wires plugs air filter and still will be driving down
the road and it qiuts even at a high speed engine light will come on but
when I get on it it will go off and not stall for a couple a days then
comes back no engine codes showing

sanfordm44356@syahoo.com

On Tue, 03 May 2005 20:54:47 -0400, "bigtee62" <kb8eir@sunlitsurf.com>
wrote:

>I have replaced plug wires plugs air filter and still will be driving down
>the road and it qiuts even at a high speed engine light will come on but
>when I get on it it will go off and not stall for a couple a days then
>comes back no engine codes showing
scan it when the light is on
you retard
and get a better scan tool


hurc ast

CSB

if you haven't got anything constuctive to say go annoy someone else retard


<sanfordm44356@syahoo.com> wrote in message
news:facg71pq3sfojcosp9m5r1ec1oas41vse9@4ax.com...
> On Tue, 03 May 2005 20:54:47 -0400, "bigtee62" <kb8eir@sunlitsurf.com>
> wrote:
>
>>I have replaced plug wires plugs air filter and still will be driving down
>>the road and it qiuts even at a high speed engine light will come on but
>>when I get on it it will go off and not stall for a couple a days then
>>comes back no engine codes showing
> scan it when the light is on
> you retard
> and get a better scan tool
>
>
> hurc ast

Jim Warman

Give us an idea of what tool you are using to check the codes. Does the
motor stall and THEN the CEL liughts or does the CEL light and then the
motor stalls?


"bigtee62" <kb8eir@sunlitsurf.com> wrote in message
news:5825d7a8dbfc406084d02ab73dc671c7@localhost.talkaboutautos.com...
> I have replaced plug wires plugs air filter and still will be driving down
> the road and it qiuts even at a high speed engine light will come on but
> when I get on it it will go off and not stall for a couple a days then
> comes back no engine codes showing
>

bigtee62

before you call someone a retard know the facts I di scan it with the light
on if you cant help better to just not comment thaknks for being an idiot

bigtee62

before you call someone a retard know the facts I di scan it with the light
on if you cant help better to just not comment thaknks for being an idiot

bigtee62

not sure what tool the local car parts used but the engine light comes on
after it stalls out then stays on for a little while then goes out after I
shovel gas pedal down I have noticed some black smoke rolling out when have
to get on it so I dont know I was wondering I have not replacd the pvc
valve yet but idiol is fine

bigtee62

not sure what tool the local car parts used but the engine light comes on
after it stalls out then stays on for a little while then goes out after I
shovel gas pedal down I have noticed some black smoke rolling out when have
to get on it so I dont know I was wondering I have not replacd the pvc
valve yet but idiol is fine