smarkw

Replaced slave, master, and clutch. performed bleed procedure 4 times.
pumping the pedal only gets minimum pressure. not enough to move slave.
Any ideas?

 

wings

when pushing the clutch peddle while running will it go into gear ;if not
the the prssure plate is not tight enough; if that not the case and the
slave is stillnot working some were there is a air leak

Jim Warman

These things can be an absolute pig to bleed. Sometimes, holding the pedal
to the floor for a few minutes can allow air to rise in the system,
eventually coming out the top.... Sometimes, using an appropraite bar to
collapse the slave cylinder works.... Sometimes, going for lunch and coming
back with renewed vigour and reduced frustration works....


"smarkw" <wagsmm@safebrowse.com> wrote in message
news:e8885306b89389bc45fdc3dfeb396ff5@localhost.talkaboutautos.com...
> Replaced slave, master, and clutch. performed bleed procedure 4 times.
> pumping the pedal only gets minimum pressure. not enough to move slave.
> Any ideas?
>