How do I program my PAL key? - Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars
 
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 06-14-05, 01:09 AM
jt
Guest
 
Posts: n/a
How do I program my PAL key?

I've read the manual for my Focus and it says hold the key in the 4
(on) position for 1 - 10 seconds but the 4 position on my car is the
'start' postion. I doubt that I'm to crank the engine for that long. Do
the mean the no 3 (on) position?

in my car 1 = off, 2= accesory (?) 3=on and 4= start

sorry, I know it sounds lame but I don't want to end up being locked
out and have to get the car towed.

TIA
jt



 
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 06-14-05, 01:09 AM
Dan Edwards
Guest
 
Posts: n/a
Re: How do I program my PAL key?

Your question is not lame and is a very valid question. I believe that since
the key is not programmed just yet, the engine will not start in the 4
position. Once it is programmed, it would then start the car in the 4
position.

Dan

"jt" <jeeptop2000@yahoo.com> wrote in message
news:1118695325.687351.83300@g43g2000cwa.googlegroups.com...
> I've read the manual for my Focus and it says hold the key in the 4
> (on) position for 1 - 10 seconds but the 4 position on my car is the
> 'start' postion. I doubt that I'm to crank the engine for that long. Do
> the mean the no 3 (on) position?
>
> in my car 1 = off, 2= accesory (?) 3=on and 4= start
>
> sorry, I know it sounds lame but I don't want to end up being locked
> out and have to get the car towed.
>
> TIA
> jt
>



 
post #3 of 4 (permalink) Old 06-14-05, 09:01 AM
jt
Guest
 
Posts: n/a
Re: How do I program my PAL key?

1 isn't but I have 2 that are, you start with the 1st key that is
programmed and working and turn that 1 to the 4 postion for 1 -10
seconds, then insert the second already programmed and working key and
turn that to the 4 position for 1 - 10 seconds, then insert the
unprogrammed key and turn that to the 4 position for 1 - 10 seconds and
that is what programs it.

 
post #4 of 4 (permalink) Old 06-14-05, 03:01 PM
SC Tom
Guest
 
Posts: n/a
Re: How do I program my PAL key?

Check this site for a newer revision owner's manual for your model year. I
looked at the newest versions of the 2000, 2001, 2003, and 2004 Focus and
they're using positions 1, 2, and 3, but not 4.

http://www.motorcraftservice.com/vdi...p?menuIndex=22

Good luck!
SC Tom

"jt" <jeeptop2000@yahoo.com> wrote in message
news:1118695325.687351.83300@g43g2000cwa.googlegroups.com...
> I've read the manual for my Focus and it says hold the key in the 4
> (on) position for 1 - 10 seconds but the 4 position on my car is the
> 'start' postion. I doubt that I'm to crank the engine for that long. Do
> the mean the no 3 (on) position?
>
> in my car 1 = off, 2= accesory (?) 3=on and 4= start
>
> sorry, I know it sounds lame but I don't want to end up being locked
> out and have to get the car towed.
>
> TIA
> jt
>



 
Sponsored Links
Advertisement
 
Reply

  Ford Forums - Mustang Forum, Ford Trucks, Ford Focus and Ford Cars > Fordforums Community > USENET NewsGroups > alt.autos.ford


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome