|
Re: Keyless remote not working
theres webpages out there that talk about cycling it like you posted and
that never worked for me, I light bulb lit above my head and I checked my
owners manual package, there was one for the keyless entry and there was a
red button under my dash that made it alot easier to program a remote that I
bought.
"Jim Warman" <mechanic@tenalpsulet.net> wrote in message
news:GrvZd.47979$gJ3.1350@clgrps13...
> What hurc means is..... cycle the ignition from off to on eight times
> (sorry, I can't remember the time constraint) rapidly ending in the on
> position on the 8th time (nine don't work). At this time, the locks should
> cycle.... side note... you should have all of your RKE fobs handy since
> this
> process erases ALL fob IDs... after the locks cycle, one at a time, press
> a
> button on each fob you wish to program to the car....
>
> HTH.
>
> <pickone@kato.com> wrote in message
> news:8p5c31p7op590bjoneht71t7lrn2ict2c2@4ax.com...
>> On Mon, 14 Mar 2005 16:35:58 -0500, "Ed" <ed@online.net> wrote:
>>
>> >The keyless remote entry on my 2000 Ford Taurus wagon does not work. I
>> >thought it may have been a dead battery in the transmitter but it turned
> out
>> >to be not the cause.
>> >
>> >Any suggestions as to what may be the problem?
>> >
>> >Ed M.
>> >
>> try "reprogramming it"
>>
>> hurc ast
>
>
>
|