reetrulez

i was lookin to change my exhaust on my 99 crown vic. i was wondering
what size the pipes are stock? and what size the inlet and outlet of
muffler should be if i keep the stock pipes. and what the length of
the muffler its self should be? thanks in advance

--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.autoforumz.com/muffler-ftopict150236.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.autoforumz.com/eform.php?p=721880

Al Bundy

I'm sure there's an easier way, but what I do is actually take a tape
and measure the muffler dimensions. I measure the circumference of the
pipes at the connections and write it all down. Then simple arithmetic
allows one to convert the numbers to diameter sizes, allowing for
thinckness of the pipes of course. That way I know what I have on the
vehicle I'm starting with and can check what's available to modify it.

Backyard Mechanic

"Al Bundy" <MSfortune@mcpmail.com> wrote:

> I'm sure there's an easier way, but what I do is actually take a tape
> and measure the muffler dimensions. I measure the circumference of the
> pipes at the connections and write it all down. Then simple arithmetic
> allows one to convert the numbers to diameter sizes, allowing for
> thinckness of the pipes of course. That way I know what I have on the
> vehicle I'm starting with and can check what's available to modify it.
>
>

if you're not sure how to do that... and many of us dont do it every
year, let alone everyday...google for an on-line calculator/conversion
site.



--
Yeh, I'm a Krusty old Geezer, putting up with my 'smartass' is the price
you pay..DEAL with it!

Frank from Deeeetroit

Take your circumference measurement and divide by pi, 3.1416, to acheive
your diameter.

Example, if your circumference is 6.29", divided by pi, you have a 2" pipe.



"reetrulez" <UseLinkToEmail@www.autoforumz.com> wrote in message
news:721880_6bf908d58292e2c16f8475da060ad2b2@autoforumz.com...
>i was lookin to change my exhaust on my 99 crown vic. i was wondering
> what size the pipes are stock? and what size the inlet and outlet of
> muffler should be if i keep the stock pipes. and what the length of
> the muffler its self should be? thanks in advance
>
> --
> Posted using the http://www.autoforumz.com interface, at author's request
> Articles individually checked for conformance to usenet standards
> Topic URL: http://www.autoforumz.com/muffler-ftopict150236.html
> Visit Topic URL to contact author (reg. req'd). Report abuse:
> http://www.autoforumz.com/eform.php?p=721880

MasterBlaster

"reetrulez" wrote

>i was lookin to change my exhaust on my 99 crown vic. i was wondering
> what size the pipes are stock? and what size the inlet and outlet of
> muffler should be if i keep the stock pipes. and what the length of
> the muffler its self should be? thanks in advance

http://www.walkerexhaust.com/images/coupons/0657.gif
http://www.walkerexhaust.com/images/coupons/0658.gif