|
Window Motor Replacement
My 1991 Mercury Grand Marquis needs to have the driver's window motor
replaced. The shop manual states "WARNING: PRIOR TO MOTOR ASSEMBLY
REMOVAL, MAKE CERTAIN THAT THE REGULATOR ARM IS IN A FIXED POSITION TO
PREVENT COUNTERBALANCE SPRING UNWIND"
As this was written in all caps (in the manual), it must be very
important to do so. Any ideas on how to do this? My thought was to run
duct tape over the top of the door frame and then down both sides of the
window (in 2 places).
Any help would be appeciated.
George
|
Linear Mode
