Ford Forums banner

1997 Explorer Code Problem (P1780)

6K views 1 reply 0 participants last post by  Jim Warman 
G
#1 ·
I just got a error code message of P1780, which tells me the problem is
the transmission control switch is out of range.

Can anyone tell me what I need to do to fix this issus, and explain
what this error code really means?

Thanks..

Jerry
 
G
#2 ·
P1780 is returned when the PCM doesn't see the OCS (Overdrive Cancel Switch)
activated during the quick test. This could result from a switch or wiring
concern or be the result of an improperly performed test. During the self
test, you will be requested to activate one or more inputs.... if the PCM
doesn't see a "change of state" in the circuit, it will flag a code.

When we are requested to activate an input, we need to be sure to allow
enough time for the PCM to see the condition since the processor cannot
monitor all of the inputs all of the time..... It, instead, looks at each
input briefly in a rapid cycle. Some inputs may get checked several times
during this cycle while other inputs may only get scanned once.

HTH


"jerry" <jhollie@cox.net> wrote in message
news:1136858340.897929.116190@g47g2000cwa.googlegroups.com...
>I just got a error code message of P1780, which tells me the problem is
> the transmission control switch is out of range.
>
> Can anyone tell me what I need to do to fix this issus, and explain
> what this error code really means?
>
> Thanks..
>
> Jerry
>
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top