Jeff

I am getting a P0446 code on my 1996 Explorer V8. I have reset the code now
about three times and each time it has returned. I also made sure my gas
cap was tight and clean, and I am still getting the code. There is
obviously a problem somewhere. Where is the charcoal canister located on
these? Any suggestions?

Thanks.

Fred 2

Lower the spare tire, then you will see a flat square box

On Sat, 16 Apr 2005 16:03:24 -0400, "Jeff"
<root@localhost.localdomain> wrote:

>I am getting a P0446 code on my 1996 Explorer V8. I have reset the code now
>about three times and each time it has returned. I also made sure my gas
>cap was tight and clean, and I am still getting the code. There is
>obviously a problem somewhere. Where is the charcoal canister located on
>these? Any suggestions?
>
>Thanks.
>

Fred 2

Just an FYI PO446 = Evaporative Emission Control Canister Vent (CV)
Solenoid Control Malfunction

Possible causes

VREF circuit to FTP sensor open

Damaged FTP sensor

Carbon Canister Vent Restriction

Kinks or blockage in the fuel vapor host/tube between CV solenoid and
atmosphere

CV SIG circuit short to PWR GND

Damaged CV soleniod

Damaged PCM


On Sat, 16 Apr 2005 16:03:24 -0400, "Jeff"
<root@localhost.localdomain> wrote:

>I am getting a P0446 code on my 1996 Explorer V8. I have reset the code now
>about three times and each time it has returned. I also made sure my gas
>cap was tight and clean, and I am still getting the code. There is
>obviously a problem somewhere. Where is the charcoal canister located on
>these? Any suggestions?
>
>Thanks.
>