Psinapse

Does anyone have the average cost and time consumption for this transfer. I
have the electric changeover now and would like to get rid of it before
winter hits here in VA. Also a list of parts would be helpful. Everything is
stock at the moment.

Thanks in advance.

Ulysses

"Psinapse" <cld3c@hscmail.mcc.virginia.edu> wrote in message
news:dg46oi$ah5$1@murdoch.acc.Virginia.EDU...
> Does anyone have the average cost and time consumption for this transfer.
I
> have the electric changeover now and would like to get rid of it before
> winter hits here in VA. Also a list of parts would be helpful. Everything
is
> stock at the moment.
>
> Thanks in advance.

If you are just looking for manual hubs it takes about $180 and an hour or
so to switch from the autohubs. You will need the special wrench for the
new hub nuts.

http://www.accessconnect.com/superwin.htm

Instructions: http://www.4x4cyberstore.com/website...l_hubs_01.html

If you are talking about getting rid of the servo motor I don't know about
that. If you need to fix your servo motor I suggest you do a google.com
search as it has been discussed many times.
>
>

Psinapse

thanks

"Ulysses" <therealulysses@yahoo.com> wrote in message
news:11ibcov3vafqu0a@corp.supernews.com...
>
> "Psinapse" <cld3c@hscmail.mcc.virginia.edu> wrote in message
> news:dg46oi$ah5$1@murdoch.acc.Virginia.EDU...
> > Does anyone have the average cost and time consumption for this
transfer.
> I
> > have the electric changeover now and would like to get rid of it before
> > winter hits here in VA. Also a list of parts would be helpful.
Everything
> is
> > stock at the moment.
> >
> > Thanks in advance.
>
> If you are just looking for manual hubs it takes about $180 and an hour or
> so to switch from the autohubs. You will need the special wrench for the
> new hub nuts.
>
> http://www.accessconnect.com/superwin.htm
>
> Instructions: http://www.4x4cyberstore.com/website...l_hubs_01.html
>
> If you are talking about getting rid of the servo motor I don't know about
> that. If you need to fix your servo motor I suggest you do a google.com
> search as it has been discussed many times.
> >
> >
>
>

d. freem

I bought the special wrench and then found out later that I could rent or
borrow it from the Auto Parts store.
df

..
>> I
>> > have the electric changeover now and would like to get rid of it before
>> > winter hits here in VA. Also a list of parts would be helpful.
> Everything
>> is
>> > stock at the moment.
>> >
>> > Thanks in advance.
>>
>> If you are just looking for manual hubs it takes about $180 and an hour
>> or
>> so to switch from the autohubs. You will need the special wrench for the
>> new hub nuts.
>>

Psinapse

If you mean the "big ass" socket I bought it too when I changed my rotors.
It doesnt seem like the changeover is much more hassle than that procedure.

"d. freem" <noemail@utk.edu> wrote in message
news:4329a55c$1_3@news.utk.edu...
> I bought the special wrench and then found out later that I could rent or
> borrow it from the Auto Parts store.
> df
>
> .
> >> I
> >> > have the electric changeover now and would like to get rid of it
before
> >> > winter hits here in VA. Also a list of parts would be helpful.
> > Everything
> >> is
> >> > stock at the moment.
> >> >
> >> > Thanks in advance.
> >>
> >> If you are just looking for manual hubs it takes about $180 and an hour
> >> or
> >> so to switch from the autohubs. You will need the special wrench for
the
> >> new hub nuts.
> >>
>
>

Ulysses

"Psinapse" <cld3c@hscmail.mcc.virginia.edu> wrote in message
news:dgcq0b$nlg$1@murdoch.acc.Virginia.EDU...
> If you mean the "big ass" socket I bought it too when I changed my rotors.


By "big ass" socket" do you mean the hex socket to remove the existing nuts
or the socket with the two prongs to install the new nuts? I found I did
not need a big socket to remove the old nuts I just tapped it gently with a
small hammer and screwdriver until the little pin thing was loose enough to
get out and at that point the old nut was only finger tight.


> It doesnt seem like the changeover is much more hassle than that
procedure.
>
> "d. freem" <noemail@utk.edu> wrote in message
> news:4329a55c$1_3@news.utk.edu...
> > I bought the special wrench and then found out later that I could rent
or
> > borrow it from the Auto Parts store.
> > df
> >
> > .
> > >> I
> > >> > have the electric changeover now and would like to get rid of it
> before
> > >> > winter hits here in VA. Also a list of parts would be helpful.
> > > Everything
> > >> is
> > >> > stock at the moment.
> > >> >
> > >> > Thanks in advance.
> > >>
> > >> If you are just looking for manual hubs it takes about $180 and an
hour
> > >> or
> > >> so to switch from the autohubs. You will need the special wrench for
> the
> > >> new hub nuts.
> > >>
> >
> >
>
>