280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1 cam
pulleys cold air roller rockers 373's offroad pipe no cats with flowmasters
155 fuel pump 180n thermostat advanced timing (next mod the turbonater
LOL).... added subframes last night & strut tower brace now just need 2 1/2
exhaust all the way out... off to the track next friday to see what shes
got!!!
IsellJeeps wrote:
> 280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1 cam
> pulleys cold air roller rockers 373's offroad pipe no cats with flowmasters
> 155 fuel pump 180n thermostat advanced timing (next mod the turbonater
> LOL).... added subframes last night & strut tower brace now just need 2 1/2
> exhaust all the way out... off to the track next friday to see what shes
> got!!!
"Michael Johnson, PE" <cds@erols.com> wrote in message
news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
> IsellJeeps wrote:
> > 280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1
cam
> > pulleys cold air roller rockers 373's offroad pipe no cats with
flowmasters
> > 155 fuel pump 180n thermostat advanced timing (next mod the turbonater
> > LOL).... added subframes last night & strut tower brace now just need 2
1/2
> > exhaust all the way out... off to the track next friday to see what shes
> > got!!!
>
> What GT-40 heads are you using?
That is an excellent rwhp number for those heads. Are they ported?
IsellJeeps wrote:
> cast not alum
>
>
> "Michael Johnson, PE" <cds@erols.com> wrote in message
> news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
>
>>IsellJeeps wrote:
>>
>>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1
>
> cam
>
>>>pulleys cold air roller rockers 373's offroad pipe no cats with
>
> flowmasters
>
>>>155 fuel pump 180n thermostat advanced timing (next mod the turbonater
>>>LOL).... added subframes last night & strut tower brace now just need 2
>
> 1/2
>
>>>exhaust all the way out... off to the track next friday to see what shes
>>>got!!!
>>
>>What GT-40 heads are you using?
>
>
>
yup i dont know exactly what they did but westside machine shop here in
houston did the work ..they are supposed to be reputible
"Michael Johnson, PE" <cds@erols.com> wrote in message
news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
> That is an excellent rwhp number for those heads. Are they ported?
>
> IsellJeeps wrote:
> > cast not alum
> >
> >
> > "Michael Johnson, PE" <cds@erols.com> wrote in message
> > news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
> >
> >>IsellJeeps wrote:
> >>
> >>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1
> >
> > cam
> >
> >>>pulleys cold air roller rockers 373's offroad pipe no cats with
> >
> > flowmasters
> >
> >>>155 fuel pump 180n thermostat advanced timing (next mod the turbonater
> >>>LOL).... added subframes last night & strut tower brace now just need 2
> >
> > 1/2
> >
> >>>exhaust all the way out... off to the track next friday to see what
shes
> >>>got!!!
> >>
> >>What GT-40 heads are you using?
> >
> >
> >
and actually the dyno was 276 280 sounds better ;)
"IsellJeeps" <jsprauer2000@yahoo.com> wrote in message
news:3cIUe.1643$zq6.246@newssvr27.news.prodigy.net...
> yup i dont know exactly what they did but westside machine shop here in
> houston did the work ..they are supposed to be reputible
>
>
> "Michael Johnson, PE" <cds@erols.com> wrote in message
> news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
> > That is an excellent rwhp number for those heads. Are they ported?
> >
> > IsellJeeps wrote:
> > > cast not alum
> > >
> > >
> > > "Michael Johnson, PE" <cds@erols.com> wrote in message
> > > news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
> > >
> > >>IsellJeeps wrote:
> > >>
> > >>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage
1
> > >
> > > cam
> > >
> > >>>pulleys cold air roller rockers 373's offroad pipe no cats with
> > >
> > > flowmasters
> > >
> > >>>155 fuel pump 180n thermostat advanced timing (next mod the
turbonater
> > >>>LOL).... added subframes last night & strut tower brace now just need
2
> > >
> > > 1/2
> > >
> > >>>exhaust all the way out... off to the track next friday to see what
> shes
> > >>>got!!!
> > >>
> > >>What GT-40 heads are you using?
> > >
> > >
> > >
>
>
If your numbers are typical for them them they must be good. Most cast
iron 40 heads get 260-270 rwhp with all the supporting mods. You should
get close to 290-300 when the 2.5" exhaust is added.
IsellJeeps wrote:
> yup i dont know exactly what they did but westside machine shop here in
> houston did the work ..they are supposed to be reputible
>
>
> "Michael Johnson, PE" <cds@erols.com> wrote in message
> news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
>
>>That is an excellent rwhp number for those heads. Are they ported?
>>
>>IsellJeeps wrote:
>>
>>>cast not alum
>>>
>>>
>>>"Michael Johnson, PE" <cds@erols.com> wrote in message
>>>news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
>>>
>>>
>>>>IsellJeeps wrote:
>>>>
>>>>
>>>>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage 1
>>>
>>>cam
>>>
>>>
>>>>>pulleys cold air roller rockers 373's offroad pipe no cats with
>>>
>>>flowmasters
>>>
>>>
>>>>>155 fuel pump 180n thermostat advanced timing (next mod the turbonater
>>>>>LOL).... added subframes last night & strut tower brace now just need 2
>>>
>>>1/2
>>>
>>>
>>>>>exhaust all the way out... off to the track next friday to see what
>
> shes
>
>>>>>got!!!
>>>>
>>>>What GT-40 heads are you using?
>>>
>>>
>>>
>
>
thats good to hear what do you think it will run with et drag radials???
hoping for 12.99999999
"Michael Johnson, PE" <cds@erols.com> wrote in message
news:Lt2dnUFRWMUxzb7eRVn-uA@giganews.com...
> If your numbers are typical for them them they must be good. Most cast
> iron 40 heads get 260-270 rwhp with all the supporting mods. You should
> get close to 290-300 when the 2.5" exhaust is added.
>
> IsellJeeps wrote:
> > yup i dont know exactly what they did but westside machine shop here in
> > houston did the work ..they are supposed to be reputible
> >
> >
> > "Michael Johnson, PE" <cds@erols.com> wrote in message
> > news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
> >
> >>That is an excellent rwhp number for those heads. Are they ported?
> >>
> >>IsellJeeps wrote:
> >>
> >>>cast not alum
> >>>
> >>>
> >>>"Michael Johnson, PE" <cds@erols.com> wrote in message
> >>>news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
> >>>
> >>>
> >>>>IsellJeeps wrote:
> >>>>
> >>>>
> >>>>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage
1
> >>>
> >>>cam
> >>>
> >>>
> >>>>>pulleys cold air roller rockers 373's offroad pipe no cats with
> >>>
> >>>flowmasters
> >>>
> >>>
> >>>>>155 fuel pump 180n thermostat advanced timing (next mod the
turbonater
> >>>>>LOL).... added subframes last night & strut tower brace now just need
2
> >>>
> >>>1/2
> >>>
> >>>
> >>>>>exhaust all the way out... off to the track next friday to see what
> >
> > shes
> >
> >>>>>got!!!
> >>>>
> >>>>What GT-40 heads are you using?
> >>>
> >>>
> >>>
> >
> >
>
With good driving 12's should be a given. I've seen people get into the
12's with hardly no engine mods.
IsellJeeps wrote:
> thats good to hear what do you think it will run with et drag radials???
> hoping for 12.99999999
>
>
>
>
> "Michael Johnson, PE" <cds@erols.com> wrote in message
> news:Lt2dnUFRWMUxzb7eRVn-uA@giganews.com...
>
>>If your numbers are typical for them them they must be good. Most cast
>>iron 40 heads get 260-270 rwhp with all the supporting mods. You should
>>get close to 290-300 when the 2.5" exhaust is added.
>>
>>IsellJeeps wrote:
>>
>>>yup i dont know exactly what they did but westside machine shop here in
>>>houston did the work ..they are supposed to be reputible
>>>
>>>
>>>"Michael Johnson, PE" <cds@erols.com> wrote in message
>>>news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
>>>
>>>
>>>>That is an excellent rwhp number for those heads. Are they ported?
>>>>
>>>>IsellJeeps wrote:
>>>>
>>>>
>>>>>cast not alum
>>>>>
>>>>>
>>>>>"Michael Johnson, PE" <cds@erols.com> wrote in message
>>>>>news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
>>>>>
>>>>>
>>>>>
>>>>>>IsellJeeps wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow stage
>
> 1
>
>>>>>cam
>>>>>
>>>>>
>>>>>
>>>>>>>pulleys cold air roller rockers 373's offroad pipe no cats with
>>>>>
>>>>>flowmasters
>>>>>
>>>>>
>>>>>
>>>>>>>155 fuel pump 180n thermostat advanced timing (next mod the
>
> turbonater
>
>>>>>>>LOL).... added subframes last night & strut tower brace now just need
>
> 2
>
>>>>>1/2
>>>>>
>>>>>
>>>>>
>>>>>>>exhaust all the way out... off to the track next friday to see what
>>>
>>>shes
>>>
>>>
>>>>>>>got!!!
>>>>>>
>>>>>>What GT-40 heads are you using?
>>>>>
>>>>>
>>>>>
>>>
>
>
I will see friday...... thanks for the encouragement!
"Michael Johnson, PE" <cds@erols.com> wrote in message
news:nvydnULzcO4gi7veRVn-oQ@giganews.com...
> With good driving 12's should be a given. I've seen people get into the
> 12's with hardly no engine mods.
>
> IsellJeeps wrote:
> > thats good to hear what do you think it will run with et drag radials???
> > hoping for 12.99999999
> >
> >
> >
> >
> > "Michael Johnson, PE" <cds@erols.com> wrote in message
> > news:Lt2dnUFRWMUxzb7eRVn-uA@giganews.com...
> >
> >>If your numbers are typical for them them they must be good. Most cast
> >>iron 40 heads get 260-270 rwhp with all the supporting mods. You should
> >>get close to 290-300 when the 2.5" exhaust is added.
> >>
> >>IsellJeeps wrote:
> >>
> >>>yup i dont know exactly what they did but westside machine shop here
in
> >>>houston did the work ..they are supposed to be reputible
> >>>
> >>>
> >>>"Michael Johnson, PE" <cds@erols.com> wrote in message
> >>>news:mIydnQy0weAm1L7eRVn-iw@giganews.com...
> >>>
> >>>
> >>>>That is an excellent rwhp number for those heads. Are they ported?
> >>>>
> >>>>IsellJeeps wrote:
> >>>>
> >>>>
> >>>>>cast not alum
> >>>>>
> >>>>>
> >>>>>"Michael Johnson, PE" <cds@erols.com> wrote in message
> >>>>>news:mIKdnbnM36g4sb7eRVn-2w@giganews.com...
> >>>>>
> >>>>>
> >>>>>
> >>>>>>IsellJeeps wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>280 at the rear wheels with gt 40 heads gt 40 intake trickflow
stage
> >
> > 1
> >
> >>>>>cam
> >>>>>
> >>>>>
> >>>>>
> >>>>>>>pulleys cold air roller rockers 373's offroad pipe no cats with
> >>>>>
> >>>>>flowmasters
> >>>>>
> >>>>>
> >>>>>
> >>>>>>>155 fuel pump 180n thermostat advanced timing (next mod the
> >
> > turbonater
> >
> >>>>>>>LOL).... added subframes last night & strut tower brace now just
need
> >
> > 2
> >
> >>>>>1/2
> >>>>>
> >>>>>
> >>>>>
> >>>>>>>exhaust all the way out... off to the track next friday to see what
> >>>
> >>>shes
> >>>
> >>>
> >>>>>>>got!!!
> >>>>>>
> >>>>>>What GT-40 heads are you using?
> >>>>>
> >>>>>
> >>>>>
> >>>
> >
> >
The AutoGuide.com network consists of the largest network of enthusiast-owned enthusiast-operated automotive communities.
AutoGuide.com provides the latest car reviews, auto show coverage, new car prices, and automotive news. The AutoGuide network operates more than 100 automotive forums where our users consult peers for shopping information and advice, and share opinions as a community.
Linear Mode
