Ford Forums banner

Fan to Radiator distance

901 views 0 replies 0 participants last post by  rburge58@bellsouth.net 
G
#1 ·
I have a 66 inline6 that I replaced the 2 core radiator with a 3 core
Transpro Ready-Rad from AutoZone. Now the fan is less than a 1/4" from
the radiator. I was thinking of removing the spacer and cutting it
down about 3/4" but when I took the fan off the spacer and fan are one
unit. The spacer looks like it is riveted to the fan. I would like to
use the same fan/spacer, can I just grind the "rivet", shorten the
spacer and somehow bolt the spacer back to the fan or do I need to get
a new fan and proper length spacer.


Richard
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top