Ford Forums banner

New differential recommendations for 9"

892 views 7 replies 0 participants last post by  66stang 
G
#1 ·
I have a 9" diff under my 66 stang. I believe its an open differential
right now as a can leave a black mark with only the right tire. But I
can leave two marks in reverse.(I wasn't trying too it just slipped)
Possibly a burnt out Tracloc??

I am currently looking into the TracTech DetriotTrueTrac. I have read
many reviews about it and seems pretty good. I also like the idea of
not having to rebuild it. I have stock 91 5.0 in the 66 stang so the
power isnt anything too special.

What differentials do you recommend?
Do the most 9"s have 28 spline axles?
Whats the average cost to have a diff installed, $400, $500??
 
G
#2 ·
"66stang" <Blindthieves@hotmail.com> wrote
> What differentials do you recommend?


Depends on what you're using it for. Street performance- 3:70's, highway-
3:00's, drag 4:11's

> Do the most 9"s have 28 spline axles?


yes

> Whats the average cost to have a diff installed, $400, $500??


I had mine completely rebuilt for $400 and that was fair. If you already
have the new gearset then I would imagine it would be less since all they
gotta do is drop it in and check the lash (well basically).
--
Scott W.
'66 HCS Mustang 289
'68 Ranchero 500 302
'69 Mustang Sportsroof 351W
ThunderSnake #57
http://home.comcast.net/~vanguard92/
 
G
#3 ·
A '66 would have a 9" only if it came with the K code HiPo.

The True Trac torsen is the best lsd out there.

Most -- nearly all -- 9" have 28-spline axles.

I paid close to $900 to have an Auburn diff and some Richmond gear
3.55's installed in a 8". I would expect the True Trac to cost more
than the Auburn, but you didn't mention gears.

180 Out
 
G
#4 ·
The guy I purchased the car from installed the 9" and 3.55's.
I should check to make sure that they really are though. I will
most likely reuse the current gears so I'm really just looking for a
differential.
 
G
#5 ·
66stang wrote:

> The guy I purchased the car from installed the 9" and 3.55's.
> I should check to make sure that they really are though. I will
> most likely reuse the current gears so I'm really just looking for a
> differential.
>

For your use, the stock Ford rebuilt LSD is plenty strong enough, quiet, works
well, and is reasonably priced. You can pay more for something like an Auburn; but
why would you?

--
..boB
1997 HD FXDWG - Turbocharged!
2001 Dodge Dakota QC 5.9/4x4/3.92
1966 Mustang Coupe - Daily Driver
1965 FFR Cobra - Finally on the Road!
 
G
#6 ·
".boB" <bobcowan@access4less.nospam.net> wrote in message
news:4334851d$0$60548$ec3e2dad@news.usenetmonster.com...
> 66stang wrote:
>
>> The guy I purchased the car from installed the 9" and 3.55's.
>> I should check to make sure that they really are though. I will
>> most likely reuse the current gears so I'm really just looking for a
>> differential.
>>

> For your use, the stock Ford rebuilt LSD is plenty strong enough,
> quiet, works well, and is reasonably priced. You can pay more for
> something like an Auburn; but why would you?
>
> --
> .boB


It might be strong enough for him, but a stock 9" LSD is about the weakest
LS unit around.

Al
 
G
#7 ·
Big Al wrote:
> ".boB" <bobcowan@access4less.nospam.net> wrote in message
> news:4334851d$0$60548$ec3e2dad@news.usenetmonster.com...
>
>>66stang wrote:
>>
>>
>>>The guy I purchased the car from installed the 9" and 3.55's.
>>>I should check to make sure that they really are though. I will
>>>most likely reuse the current gears so I'm really just looking for a
>>>differential.
>>>

>>
>> For your use, the stock Ford rebuilt LSD is plenty strong enough,
>>quiet, works well, and is reasonably priced. You can pay more for
>>something like an Auburn; but why would you?
>>
>>--
>>.boB

>
>
> It might be strong enough for him, but a stock 9" LSD is about the weakest
> LS unit around.
>
> Al
>
>

Sometimes upgrading to a stronger part isn't the best idea. You end up spending
more money and going to more effort with no advantages. For a stock 5.0, a stock 9"
is plenty strong enough to last for 100,000 miles. You could spend an additional
$300 for a stronger diff, but it will still work invisibly for 100,000 miles. You
haven't gained any advantage for the additional expense.
Same thing with axles, springs, shocks, etc. You can spend a lot of money to
get a "stronger" part, but you don't gain anything. No value added. Save the money
and use it for something worth while - like better seats.
OTOH, if future plans call for a stronger motor, drag slicks, or a class III
trailer hitch, then it's worth while to go for the stronger parts now.

--
..boB
1997 HD FXDWG - Turbocharged!
2001 Dodge Dakota QC 5.9/4x4/3.92
1966 Mustang Coupe - Daily Driver
1965 FFR Cobra - Finally on the Road!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top