|
Re: stock sway bar size in '69?
"Blue Mesteno" <69ta_mustang@comcast.net> wrote in message
news:QpSdna8Gj_Hp33DeRVn-vw@comcast.com...
> How thick was the stock front sway bar in '69 with a 351W?
>
> What would adding a 1/2" rear sway bar without swapping in a larger front
> sway bar do?
Scott,
The front sway bar on mine is a little under 7/8", say 109/128". No rear
sway bar.
I'd say the additional rear swar bar would assist the front one and give you
less body roll. It would take care of the rear sway torquing up to the
front one. I'm not an expert, but it seems like just adding the rear one
will have a big impact on body roll. I'd add the rear one first, and then
go from there.
--
John - ThunderSnake #59
'69 Mach 1 w/ 390 4V
Wide Ratio Toploader
3.50 Traction-Lok
Acapulco Blue
|
Linear Mode
